Thin Rip Table Saw Jig CL01-12 The 120V Dual Clamp-On Power

The 120V Dual Clamp-On Power Bar and USB Power Station Black is equipped with six 120 V outlets

The 1/2 HP motor is very quiet

decks and commercial structures

It is designed to securely latch a flap closed and hold the flap in a fully opened position with a soft close

(1) WoodRiver Dust Connection - 5" Aluminum Blast Gate for Dust Collection System

Thin Rip Table Saw Jig CL01-12 The 120V Dual Clamp-On PowerMake repeatable thin strips using this WoodRiver Thin Rip Table Saw Jig. To set it up, install this jig in your table saw miter slot, and simply set the thickness of the strip desired. Measure the distance from the outside of the blade to the sealed bearing and lock the jig in place. Set the fence against the workpiece and rip to size. For repeatable strips, readjust the fence so the workpiece is touching the bearing and repeat the cut. Features: