Aluminum 2" Female Camlock x 2 1/2" Male NH Fire Hose Inlet Threads_NH / NST This hose is designed to

This hose is designed to be used in lower range water pressure situations having a maximum pressure of 150 PSI

This cover will fit discontinued HRS24 and HRS25-24 reels

If debris larger than the drilled holes should enter from the dry hydrant outlet located roadside it would not be able to be flushed out into the water source

Our 2 1/2 inch Made in the USA single jacket fire hose is manufactured to this specification shall meet and exceed all performance requirements of NFPA 1961 and Underwriter's Laboratories standards

Swivel attachment must be stainless steel ball or 6269-T9 aluminum roller bearings

Aluminum 2" Female Camlock x 2 1/2" Male NH Fire Hose Inlet Threads_NH / NST This hose is designed toOur aluminum cam and groove to NH fire hose threaded fittings are designed to convert a standard NH NST "fire hose thread" hose or adapter to a standard camlock. Finished in red to distinguish them from regular camlock to NPT "pipe thread" cam and grove fittings. NH NST threads are NOT compatible with NPT or NPSH threads. Under no circumstances should cam and groove couplings be used for compressed air or steam service! Connections The female side of