6" Steel Hose Mender Inlet Threads_NH / NST 2 inch NPSM polyethylene basket

2 inch NPSM polyethylene basket strainer

Our 1 1/2 inch double jacket lay-flat mill hose is excellent for light industrial and construction applications where medium water pressure is used

open and close gas valves

communities have seen an increase in stolen copper and brass

Type "F" brass 1 1/2 inch male camlock (Cam & Groove) coupler to 1 1/2 inch male NPT threads

6" Steel Hose Mender Inlet Threads_NH / NST 2 inch NPSM polyethylene basketThe hose mender allows for a user to cut off the bad section of the hose and clamp the hose back together. The hose mender is not designed for compressible products such as air, nitrogen, or steam. Working pressure may vary with the construction of the hose, the type of clamping system that is used, and the application. A coupled length of hose should be tested to 1 1 2 times the working pressure and held for fifteen minutes without leaking or